Features
Net-Lynx 24-port Full Duplex Fast Ethernet Switch
Supports 24 10M/100M auto-detect Half/Full duplex switch ports
Supports 802.3x flow control for full-duplex mode and collision-based backpressure for half-duplex mode
High performance switching engine performs forwarding and filtering at full wire speed
Supports Head of Line (HOL) blocking prevention
Supports Non-blocking Store & Forward architecture
Performs Broadcast Storming Filter function
Supports self-learning and address recognition mechanism enables forwarding rate at wire speed
Supports port-based VLAN and 802.1Q tag-based VLAN with both IVL and SVL
Supports 802.1v protocol-based VLAN classification
Supports port trunking with flexible load distribution control and fail-over function
Provides 7 trunk groups of up to 4 member ports within 24 ports
Supports ingress port security mode
Supports source-port-based, destination-port-based, and source-destination-pair-based Sniffer function
Embedded 1.5Mbit SSRAM for control data, including 6/8/10/14K address space for 64-bit address table entries, shared with 2K 128-bit VLAN table slots, 2/4K 16-bit protocol-based VLAN index table slots, 32-bit port mask table of 448 slots for static multicast address entries
Web Smart Configuration

Specification

Memory
Memory (Maximum) - ( )

Routing
Layer 2 Services - Static priority and 802.1p Class of Service with 2-level priority queuing

Interfaces/Ports
Console Ports - 24x RJ-45
Fixed Ports - x
GBIC Slots - (Available)
Network Speeds Supported - 10/100 MBps

Compliance
Standards Compliance - FCC part 15 Class A, CE

System
Protocols Supported - IEEE 802.3 10Base-T • IEEE 802.3u 100Base-TX • IEEE 802.3x Full Duplex Flow Control

Electrical
Voltage/Power/Frequency - 100 to 240 VAC / 16 W / 50 to 60 Hz
Power Adaptor Type - Internal
Power over Ethernet (PoE) - ,

Environmental
Environmental - Operating Temperature 0 to 40 °C - Humidity 10 to 90 %

Physical
Form Factor - Network Switch
Dimensions - 14.1 cm (W) x 44.0 cm (D) x 4.4 cm (H) - Weight 1.5 kg